ACER ASPIRE SA85 LAN DRIVER

Opening the System 1. T Load Default Settings These parameter settings can be loaded through this menu, however, the stable default values may be affected. Download the free Open Icecat catalog. Detach the USB module from the chassis. Acer Aspire Aspire SA

Uploader:	Samuzragore
Date Added:	23 November 2004
File Size:	56.65 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	55187
Price:	Free* [*Free Regsitration Required]

Acer Aspire SA85 XP Home Desktop | Asianic Distributors Inc. Philippines

The product family is a generic trademark of a brand to indicate a very wide range of products, that can encompass multiple categories. The command line at the bottom of the menu tells you how to move within a screen and from one screen to another. The available setting values are 3 and 1. TM2 Bus Ratio This item represents the frequency bus ratio of the throttled performance state that will be initiated when the on-die sensor goes from not hot to hot.

T Resume recovery time: For systems bundled with speakers, before powering on the system, connect the speaker cable to the audio out external speaker port on the back panel of the system. Setting to On will turn on the NumLock key when the system is powered on.

When the default value Fast is selected, the Gate A20 is aepire by port 92 or chipset specific method resulting in faster system performance.

Loosen the two screws on each side to detach the HDD. Factory default image and click Next. This function is only valid for systems Delay 4 Sec.

Usually application needs at least 5 hours for publishing information about new products. Disconnect the PSW fan cable from the mainboard. This memory area is not part of the system RAM. Acer Aspire Aspire SA Turn the housing back, and remove the four screws as shown here. For whatever reasons a part number aceer is made, sa885 will not be noted in the printed Service Guide.

This section provides a brief description of the basic system peripherals.

Disabled This option is used to set video as85 option. None KB, 5. Some chipsets require this parameter in order to set up the memory configuration properly.

Acer Aspire SA85 Drivers

If the message disappears before you respond and you still wish to enter Setup, restart the system by turning it OFF and On. Press fastener as red arrowhead shown, then remove the front panel as shown.

Remember to disable Spread Spectrum if you are overlocking because even a slight jitter can introduce a temporary boost in clockspeed which may just cause your overlock ed processor to lock up. These registers control most of the system options in the computer.

Acer Aspire SA85 Windows XP Drivers

Use the arrow keys to scroll to the language version you want. The following screen shows the Power Management parameters and their default settings: Default Settings The following table describes the parameters found in this menu: Change these settings only if you are familiar with the chipset.

To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine e. When setting the jumpers, ensure that the jumper caps are placed on the correct pins.

III Conventions The following conventions are used in this manual: Loosen the two screws on each side to detach the ODD. Pentium 4 and Celeron are trademarks of Intel Corporation. High figures will improve performance.